Product Catalog

  • Manufacturer: Porta-Nails, Inc.
  • SKU: 627711
  • Model Number: 402

The easy to use 402 Porta Nailer is the finest most versatile flooring nailer on the market and comes ready to angle nail 5/8, 3/4 and 33/32 In. thick tongue and groove flooring. The nailer will also nail 3/8 -9/16 In. floors, metric configurations including bamboo and can be converted for face nailing by changing accessory shoes (sold separately). PNI’s “Preferred-Seating" System uses an exclusive ratcheting ram to ensure nails are properly seated and flooring strips are tightly driven together. The patented “anti-split” nail cuts through wood without splitting your floor and three lengths of nails will insure you have the right fastener for the job. The nail’s wide head and grapple barb design provides superior holding power. Porta-Nailers are world-renowned by professionals and do-it yourselfers alike and are designed to protect today’s Pre Finished Surfaces and positions easily on your wood floor to insure proper nail placement. Made with

Please contact us for current pricing and availability.

  • Manufacturer: Multiquip
  • Model Number: WM70PE

Whiteman mortar mixer towable, Heavy duty ideal for mixing wide variety of sand and cement mixes

Please contact us for current pricing and availability.

  • Manufacturer: Multiquip
  • Model Number: MC44SE

Multiquip concrete mixer towable, The ultimate in heavy mixers, ideal for mixing large aggregrate

Please contact us for current pricing and availability.

  • Manufacturer: MK Diamond
  • Model Number: 153243

The MK-101 Pro24 features a fully enclosed high torque, fan-cooled, micro V-belt drive motor with permanently lubricated, dual-sealed, heavy-duty blade shaft bearings. A multi-position motor post and cutting head enable convenient cutting of various tile sizes and the built-in water distribution system supplies water to both sides of blade. The 101 Pro24 encorporates a variable height cutting head that allows for plunge cuts and use of blades smaller than 10" in diameter. The rugged Cast aluminum blade guard and motor post with a one-piece reinforced zinc-plated steel frame accommodates 6" and 8" profile wheels. A simple blade shaft lock makes for easy blade removal and the linear-bearing and chrome plated guide-bar assembly ensure precise cutting of tile up to 24" in length and 14" on the diagonal. Made in the USA with a One-year limited warranty

Please contact us for current pricing and availability.

  • SKU: 724557
  • Model Number: 101724

JET 1-Ton Capacity 10' Lift MANUAL CHAIN HOIST -- Standard Feature found only in higher priced models. Economical hand chain hoist designed for years of trouble-free service. All steel construction with a durable powder coat finish. Lightweight, compact design for low headroom applications. Needle bearing supported load sheave for smooth operation. Completely enclosed Weston type automatic brake system for precise load spotting. Triple-spur gears provide high efficiency ratio with minimum effort. Induction hardened grade 80 load chain. Drop forged hooks with heavy-duty safety latches swivel 360° for easy rigging. Smooth rolled edge on hand chain cover prevents side pull jamming. Standard hand chain drop equals lift length. Proof tested with test certificate. Complies with OSHA, ANSI/ASME B30.16 and HST-2 standards. See True Value # 724557

Please contact us for current pricing and availability.

  • SKU: 724664
  • Model Number: 450077

JET 1-Ton Capacity TRANSMISSION JACK -- Designed for the removal and installation of auto and light truck transmissions or transfer cases. Wide stance steel frame features reinforced steel side plates that double as tool trays. Heavy-duty steel ball bearing swivel casters. Fully adjustable saddle, corner brackets and safety chains. "Quick" Lift hydraulic pump for rapid lifting to contact point without load. Safety overload and top-of-stroke bypass system provides maximum pump protection. Pump handle swivels 360° for operation in any position. Proof tested and certified. Complies with ANSI/ASME PALD-2 standards. See True Value # 724664

Please contact us for current pricing and availability.

  • Manufacturer: Jet
  • Model Number: 453323K

JET 22-1/2L-Ton Capacity Hydraulic BOTTLE JACK -- JET JHJ Series bottle jacks are used for multiple applications: pushing, bending, pressing, or straightening. With base and cylinder electrically welded together to assure strength and eliminate leaks, extreme temperatures do not affect them. The JET low profile truck models or standard models vary in capacities from 12-1/2 tons to 100 tons. All JHJ Series bottle jacks comply with ANSI/ASME B30.1 and PALD-1 standards

Please contact us for current pricing and availability.

  • Model Number: 441310

JET 10-Ton Capacity SJ Series SCREW JACK -- Contractor quality mechanical jack for all-purpose lifts and supports. Holds heavy loads indefinitely - will not creep. Heavy-duty bell shaped cast base. Less effort required to lift capacity load with new design. Corrugated steel swivel head turns easily under load. Easy to carry and position with built-in handle. Compliance: ANSI/AMSE B30.1 standards. Turning bar is optional

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: X575EM3

Spin Drive with Open Drum X575EM3

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: X500

Spin Drive Less Snake with Open Drum X500

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: R-KR-A

Kinetic Water Ram - A

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: I-T6FL

3-6ft Telescoping Closet Auger

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: ER-E

Easy Rooter with 5-8in x 100ft cable

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: ER-D

Easy Rooter with 3-4in x 100ft cable

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: ER-C

Easy Rooter with 5-8in x 75ft cable

Please contact us for current pricing and availability.

  • Manufacturer: General Wire Spring
  • Model Number: EJ-B

Easy Rooter Jr with 75ft cable

Please contact us for current pricing and availability.

  • Manufacturer: EDIC
  • Model Number: 3004AD

Exclusive hi-tech design makes it the most versatile, compact and portable air mover in the industry. Heavy-duty polyethylene housing with "granite" look is durable and never looks dirty. Balanced carry-along handle distributes weight evenly for superior portability. Easy to store or stack for transport. Thermally protected motor

Please contact us for current pricing and availability.

  • Manufacturer: EDCO
  • Model Number: 48100D

14" 13HP gas walk behind street saw

Please contact us for current pricing and availability.

  • Manufacturer: EDCO
  • Model Number: C10342

Air Powered 5' ergonomic chisel scaler, require 6-8 CFM @ 90 PSI

Please contact us for current pricing and availability.

  • Manufacturer: EDCO
  • Model Number: 27100

ALR-BS Big Stick, requires 12-15 CFM @ 90 PSI, includes one 3" Chisel

Please contact us for current pricing and availability.